![]() |
|
|
|
#1
|
|||
|
|||
ASR Brake Fluid Flush HELP
Hello All
I'm attempting to flush the brake fluid on my 1992 500E using the Motive Pressure Bleeder... All four calipers went fine... but when attached the bleeder bottle to the ASR bleeder valve and start the engine... no fluid comes out... the ASR & ABS lights go on at start up and shut off within seconds like normal... is there a trick to getting the ASR bleeder valve to bleed? I mean NOTHING comes out... the screw can be completely removed... nothing... the bleeder valve i'm using is on the top of the ASR unit (cover removed) & points toward passenger seat and reads "SP"... Any help appreciated...thanks in advance! -Peter Last edited by SanFranBenz; 07-30-2008 at 02:20 PM. |
#2
|
|||
|
|||
there is an article at STARTUNED magazine concerning brake bleed, it may help,
ust google STARTUNED It's an official MB tech help site |
![]() |
Bookmarks |
|
|