Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-11-2008, 09:06 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
When you start the car does the ABS lamp go out?

When you start moving does the ABS lamp come on?

The answers will determine where to start diagnosis.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #2  
Old 09-11-2008, 09:23 AM
Registered User
 
Join Date: May 2001
Posts: 356
oops, I guess I failed to make myself clear yet again..
ABS light comes on - with all the other dash lights - when I turn the key to start the car but stays on brightly all the time while car is running (the other lights go out immediately as they should. ABS Light goes out when I turn engine off - key all the way to the left.

thanks



1987 300SE- Euro
Reply With Quote
  #3  
Old 09-14-2008, 09:44 PM
89 300E
 
Join Date: May 2008
Location: Long Island, NY
Posts: 80
Quote:
Originally Posted by M.B.DOC View Post
When you start the car does the ABS lamp go out?

When you start moving does the ABS lamp come on?

The answers will determine where to start diagnosis.

How about cases where the ABS light is out [following lamp test] for a short time, then comes on typically just at a moderate bump [expansion joint for example]. Before the light comes on you can induce ABS activation [say by hard braking, with the right side wheels on sand or leaves]

I recall seeing something about the connectors in the relay socket needing to be re-crimped. If this is the fix, what sort of tool is needed? ["Kablex" connector tools?]
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page