|
|
|
#1
|
||||
|
||||
Where is the PCV valve
I have been told that if the PCV valve goes bad that the engine will start to suck oil down real fast, but where is the valve?
|
#2
|
||||
|
||||
Which model and year?
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#3
|
||||
|
||||
oh right its an 87 300E
|
#4
|
|||
|
|||
As I remember, there is not a replaceable PCV valve on the M103 engine, as there are on most engines. Instead, it's just a little orifice that connects the intake manifold with the oil galley on the head - no moving check valve or ball. To clean it, if it clogged, I think you have to remove the intake manifold.
Someone else might check me on this; it's been years since I had the head off and looked at that. DG |
Bookmarks |
|
|