![]()  | 
	
		
 First Hiccup on The Excelsior: Turn Signals 1995 E320 Wagon 
		
		
		Today the turn signal controls were unresponsive, as well as the slowest setting of the windshield wiper. Everything else on the multi-switch worked properly, but the hazard switch was unresponsive as well. Everything came back once, and was working perfectly until the next time I drove the car. 
	I already changed the fuse, and am curious if people think the multi-switch is the issue or the relay controlling it. It seemed like a slam dunk for the multi-switch until I noticed the hazard switch not working either. Could a failed multi-switch cancel out hazards? Where is the relay controlling all of this located, by the way? I'm still getting acclimated to the new chassis.  | 
		
 I'd have to look it up, but I think the convenience module (long relay in the center, back half of the fusebox) controls that and the rear defog. I had to replace mine ('94) as my rear-defog was not working properly. 
	If that's it, I'm looking at the sucker, 201 821 00 47 The 201/124/126 used them, easy to find a replacement, I had one sitting around gathering dust.  | 
		
 I had a similar problem not long ago. I pulled the multi-function relay out-it's under the cover to the rear of the fuse box-and placed it in the freezer. After getting it cold the functions controlled by the relay again worked, until the rely warmed up. I replaced the relay and haven't had any problems with it's functions since. 
	 | 
		
 How does putting it in the freezer spring new life? 
	 | 
		
 combination relay 
		
		
		Right where the others said!  I had identical problems!  Turned out to be the relay.  Got it for about $60 online and everything was fine after replacement! 
	 | 
		
 Quote: 
	
 Where did you get this $60.00 replacement?  | 
		
 Are the turn signals the only thing not working? 
	 | 
		
 Quote: 
	
 I'm not gonna take a photo tonight, it's 35 deg and raining. To the rear of the fuse box is a cover held down by 4 screws. Take out the screws and lift the cover, the relay is marked "mult-function" IIRC.  | 
		
 Quote: 
	
 Its freezing outside, so perhaps if it works when I start it in the morning???  | 
		
 Quote: 
	
  | 
		
 Its 28 degrees currently, and after sitting outside overnight, the signals and windshield wipers are working properly... I guess that means its the relay. Thanks everybody. 
	 | 
		
 Combination Relay 
		
		
		
	 | 
| All times are GMT -4. The time now is 06:03 AM. | 
	Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
	
Search Engine Optimization by vBSEO 3.6.0
	Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website