|
|
|
|
|
#1
10-05-2001, 12:04 AM
|
|||
|
|||
|
AC comp.
1990 mb 300sel no power to AC comp. Replaced comp. clutch went bad.
This modle has a mass relay that is fuel pump relay as well as ac clutch cut out. Low pressure switch ok freon charge ok. I need help on this one so i dont become a parts replacer. How do i read codes ? I have michal on. demand but not much help. I work for a MB dealer for 6.5 years then started my own shop in 1983 I love MBs but not this one Duane R. Phillips |
|
#2
10-05-2001, 08:48 PM
|
|||
|
|||
|
I would check the "ON" signal to the low pressure switch. This wire comes from the pushbutton, goes through the low pressure switch then goes to the MAS unit. Onces it tells it to energize, the mass unit does the rest.
I have replaced many MAS units for this reason.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Scott, how would I go about a comp set in the front? | Snoopy572 | Car Audio and Multimedia | 7 | 05-26-2003 01:55 AM |
| Need help running a line from engine comp to inside car!!! | spinedoc | Mercedes-Benz SL Discussion Forum | 9 | 03-09-2003 10:34 AM |
| Device to Compress Hydro Comp Spring | Four.Five | Tech Help | 3 | 01-04-2003 07:21 PM |
| 126 A/C Comp won't kick in? | Toxicant | Tech Help | 15 | 07-25-2002 02:40 PM |
| A/C comp. switch just wobbles back and forth.. | juan | Tech Help | 0 | 09-11-2000 10:22 PM |
Linear Mode
