Feel dumb asking but does anyone know how to pop the cover on the coil cover to replace the wire to the distributor?

thanks

Un-snap at the vertical seam, then lift the cover off.

__________________
Fred Hoelzle

Thanks Ferdman!

Much easier than getting it back on, trust me. For some reason that cover is a real pain to get to snap back closed.


-tp

Thats because its supposed to be smacked in place by a beefy german fist!

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)

The last time I had mine off, I had to lightly sand down the little tit that slides into the hole - probably from an over abundance of German smakking.

__________________

Don't Chrome them; polish them