|
|
|
#1
|
|||
|
|||
removing mirror housing-2000 E320
I'm not familiar how to release the plastic mirror cover from the mirror
framework. on my 99, it was easy as pie: tweak retaining wire as depicted in the MB video. with the 00, they have a slightly different mechanism and the spring retaining wire isn't there/seen/used. don't want to break anything so your experience is appreciated.
__________________
-- raymond~ 47º 34'N 122º 18'W |
#2
|
|||
|
|||
The mirror cover locks on a SPRING (wire). That is at the outer curved area.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
tnx Doc for the tip. do I poke straight at it, or is it pressed to the side (to-
wards the plastic...or towards the mirror)? i'll give it a go again. not my car so want to be sure i'm doing it correctly.
__________________
-- raymond~ 47º 34'N 122º 18'W |
#4
|
|||
|
|||
well, turns out the the retaining device was no spring wire at all, like I thought.
So MBDoc, you may want to update your information file. Here is the flat metal spring 'flap' which needs to be depressed to release the mirror cover for face lifted models. I don't know how far this design extends into 211 models. one arrow points to plastic catch molded into the housing. the other arrow identifies the location to depress the metal catch.
__________________
-- raymond~ 47º 34'N 122º 18'W Last edited by raymond~; 04-21-2009 at 12:19 PM. |
Bookmarks |
|
|