My son removed a good portion of my front bumper cover (don't ask how). I have had it replaced but now my temp. reading is -36 all the time. I'm assuming I lost the temp sensor with the cover. Where is it supposed to be, and where is the wire routed? My guess is behind the front license plate. Can anyone verify this?

Tia

__________________

Muleears
'07 E320 Bluetec 133K my DD
'04 Jaguar XJ8 VDP, 34K
'10 Hyundai Accent 60K Grocery Getter
'02 VW Golf soon to be on the road again
'97 E300 Diesel Son's DD
'61 VERY tolerant wife

Hampton Roads, VA USA

Gone but not forgotten:
'67 250S 95K
'86 300SDL
'87 300D Turbo, 364K! R.I.P.
'98 E300 Turbodiesel, 213K
'02 S420, 164K
'01 Prius 138K

Should be in the lower bumper near the drivers side fog lamp.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Thanks M.B.
We have three spare wires near there would those be the ones? Does the sensor use three?

__________________

Muleears
'07 E320 Bluetec 133K my DD
'04 Jaguar XJ8 VDP, 34K
'10 Hyundai Accent 60K Grocery Getter
'02 VW Golf soon to be on the road again
'97 E300 Diesel Son's DD
'61 VERY tolerant wife

Hampton Roads, VA USA

Gone but not forgotten:
'67 250S 95K
'86 300SDL
'87 300D Turbo, 364K! R.I.P.
'98 E300 Turbodiesel, 213K
'02 S420, 164K
'01 Prius 138K

If it is still intact it will have a short metal probe on the end of it.

__________________
1981 300TD
2005 C55
2004 E500
1999 ML430
1992 400E
1998 C43
2001 SL500
1988 300SEL
1986 190E 16V
1991 190E 2.6