|
|
|
#1
|
|||
|
|||
DIY Crank Pulley
I need the crank pulley, crank seal replaced on my 98 320. Has anyone attempted a DIY on this? I have changed the water pump, plugs, brakes, motor mounts etc.......I'm a little reluctant to try this. Local Indie shop wants $200 labor plus parts total $350.00
|
#2
|
||||
|
||||
$350 might be worth it. Do you have the crank holding tool? Might be pretty hard to do the job without it.
__________________
1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
Bookmarks |
|
|