|
|
|
#1
|
||||
|
||||
Help Trans cooling pipe, which line is the inlet top or bottom?
I need some help, trying to install a separate transmission oil cooler with fan temperature sensor switch for my 1991 300se. But do not know which line is inlet and return. Can any one help me out please thanks.
BTW my trans is empty right now other wile I could test with the engine run for a few second, so thank you for any help….cheer |
#2
|
||||
|
||||
ANY ONE PLEASE HELP!
Is the right hose (passenger side) is the inlet hose to the radiator? and the left hose is the return hose? yes,no? am i correct??? |
#3
|
|||
|
|||
IIRC the driver's side is flow to the radiator cooler side and the passenger's side is return line to the transmission. On my 300TE I installed it on the flow to radiator cooler side. Mark
|
#4
|
|||
|
|||
Whichever one is hotter while running is the outlet TO the cooler.
__________________
-tp 1990 300SE "Corinne"- 145k daily driver - street modified differential - PARTING OUT OR SELLING SOON - PORTLAND OR. AREA - PM ME FOR DETAILS 1988 560SEL "Gunther"- 190K passes anything except a gas station 1997 S420 - 265k just bought it with a rebuilt trans. Lovely condition |
#5
|
||||
|
||||
Thank you FYI Hookedon, I'll double check and install when my cooler arrive sometime this week..cheer
|
#6
|
||||
|
||||
Thanks Tinypanzer, but my trans is empty now and water was in it. I drain all the oil removed pain, valve body and let it drip for a week now and I'll flush it before install my cooler...cheer
|
#7
|
|||
|
|||
You should drain the torque convertor also.
|
Bookmarks |
|
|