Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-15-2009, 12:40 PM
Registered User
 
Join Date: Dec 2003
Location: new jersey
Posts: 181
I closed up the valve cover.
Removed vacuum line from Fuel Pressure Regulator, no fuel coming thru at idle.
re-checked several vacuum lines, disconnected and re-attached to feel how snug they were. They all seem good.
Restarted car, it was rough for about 5 minutes, burned some residual oil that seeped down from cylinder # 1 plug cavity.
I cleared all codes then disconnected battery for 5 minutes.
Reconected battery, took it on the highway and now idle is smooth as glass.
Either the dislodged valve cover seal at cylinder #1 was culprit of vacuum leak or there was a leak in one of the vacuum lines that I closed.
In any case, I am now idling smooth.
Thanks to all for inputs.
(also posted on 1994 diagnostic LED trouble thread)
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page