Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-20-2009, 04:07 PM
Registered User
 
Join Date: Jul 2005
Posts: 18
1993 300E 3.2L Cold Start Problem

1993 300E 3.2L

After a cold start, my car will run roughly, but usually stay cranked.

If I start it cold and put it immediately into reverse (or drive) and try to start driving, it loses all engine power and usually dies. It sounds like it's choked or something and cannot get enough air, like it's bottoming out.

After this initial problem, I can usually get it started by giving it a little gas, and then it runs perfectly. I just changed the plugs and wires (Bosch).

Any suggestions?

Also, I recently installed a rebuilt transmission in it, which has shifted hard (sporadically) ever since I got it. Is this normal? If not, it still has a warranty.

Thanks for any help you can give.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page