|
|
|
|
|
#1
11-11-2001, 04:39 PM
|
|||
|
|||
|
75 450 wont keep running
Hi All
while tuning the car today i set the dwell at 30 deg. the meter was connected to the coi,when i started the car ,it ran for appx. 1 min the tach. started fluxuating and the car died. Dwell was @ 30. It would not start again for about 5 mins. and then started. Again the tach. fluxuated after abt.1 min and the car died. This happened 4 times. Did i cause damage to the coil or the points???? I also noticed that the tach would shift as if i had a bad connection.Fuel pressure is ok and at the proper pressure. I am totally lost and need some help PLEASE Bob 
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1998 C280 Temperature running higher. | Ionman | Tech Help | 12 | 04-05-2011 01:02 PM |
| 99 ML320 running board lighting module | 16ue | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 1 | 05-06-2003 10:13 PM |
| Grandad's 124 running really hot; solved! | azhari | Tech Help | 0 | 02-01-2003 04:10 AM |
| 1987 190E 2.6 Running Rich?? | arnelrac | Mercedes-Benz Performance Paddock | 3 | 02-27-2002 01:17 PM |
| 1986 Euro 190E 2.3-16 Suddenly Running Really Rough - Any Suggestions? | JimSmith | Tech Help | 2 | 02-15-2002 09:56 PM |
Threaded Mode
