Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-30-2009, 02:43 PM
Registered User
 
Join Date: Sep 2009
Location: Great State of Texas
Posts: 440
Stupid question - the oil pan doesn't have a drain plug? EPC shows one at the bottom rear of the pan...
__________________
A.S.E Tech A1,A6,A7,A8 & MVAC 609 + EPA 608

Unless stated otherwise, any question I ask is about my greymarket 1985 380SEL.
Reply With Quote
  #2  
Old 11-30-2009, 04:32 PM
MattBelliveau's Avatar
Gotta another one...
 
Join Date: Jun 2005
Location: NE Ohio
Posts: 1,685
Quote:
Originally Posted by dhjenkins View Post
Stupid question - the oil pan doesn't have a drain plug? EPC shows one at the bottom rear of the pan...
How's that a stupid question? The guys got 10 posts, maybe he's new to DIY. Sheesh.
__________________
1989 300E 144K
Reply With Quote
  #3  
Old 11-30-2009, 05:36 PM
Registered User
 
Join Date: May 2003
Posts: 218
It's really not much different than changing the oil on most vehicles. Take a look under the car to locate the oil pan. Once you locate that, the drain plug is at the rear of the pan. It requires a 13mm wrench. Simply unthread the plug to drain the oil and while that is draining replace the oil filter.

The oil filter is a cartridge type. When looking at the engine from the front of the vehicle, the oil filter housing is on the left near the front of the engine beneath the passenger side exhaust manifold. The cap requires a 13mm wrench to remove the bolt that secures it. Remove the cap and filter, replace the two rubber O-rings on the cap, install the new filter, and re-install the cap.

Then put the oil drain plug back in and fill the engine with the recommended amount of oil. The most difficult part for me is getting the cap back on the filter housing. Last time I changed the oil in my 140 it took me about an hour just to get that back on.

Last edited by Mercedes Guy; 11-30-2009 at 09:23 PM.
Reply With Quote
  #4  
Old 11-30-2009, 06:11 PM
Registered User
 
Join Date: Sep 2009
Location: Great State of Texas
Posts: 440
Quote:
Originally Posted by MattBelliveau View Post
How's that a stupid question? The guys got 10 posts, maybe he's new to DIY. Sheesh.
For the love of...

I didn't mean his question was stupid, I thought *I* might be asking a stupid question, since the OP considered sucking it out of the filler a common practice; I honestly didn't know if he had a drain plug on his pan or not (though I assumed he did, which is why I thought it might be a stupid question).
__________________
A.S.E Tech A1,A6,A7,A8 & MVAC 609 + EPA 608

Unless stated otherwise, any question I ask is about my greymarket 1985 380SEL.
Reply With Quote
  #5  
Old 11-30-2009, 09:11 PM
MattBelliveau's Avatar
Gotta another one...
 
Join Date: Jun 2005
Location: NE Ohio
Posts: 1,685
Quote:
Originally Posted by dhjenkins View Post
For the love of...

I didn't mean his question was stupid, I thought *I* might be asking a stupid question, since the OP considered sucking it out of the filler a common practice; I honestly didn't know if he had a drain plug on his pan or not (though I assumed he did, which is why I thought it might be a stupid question).
Sorry man! No worries.
__________________
1989 300E 144K
Reply With Quote
  #6  
Old 11-30-2009, 09:24 PM
TylerH860's Avatar
KHAAAAAAN-gress
 
Join Date: Aug 2007
Location: Wichita, Ks
Posts: 5,187
He may not be seeing it because of the plastic belly pan or whatever its called. I've never been underneath a W140 but I imagine it has one just like a late W126 and W124.
__________________
1985 500SL Euro w/ AMG bits 130k
1984 300SD Turbodiesel 192k
1980 240D Stick China 188k
2001 CLK55 AMG 101k
2007 S600 Biturbo 149k Overheated Project, IT'S ALIVE!!!
Reply With Quote
  #7  
Old 12-01-2009, 06:27 PM
Registered User
 
Join Date: May 2003
Posts: 218
Quote:
Originally Posted by TylerH860 View Post
He may not be seeing it because of the plastic belly pan or whatever its called. I've never been underneath a W140 but I imagine it has one just like a late W126 and W124.
That's a possibility. The majority of my experience with the W140s is with the later models. I thought I read somewhere that the early W140s had the belly pans but that feature was eventually eliminated. I'm sure some people also took them off and never put them back on. I know that the late W140s didn't come with them, though.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page