Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-30-2009, 08:41 PM
Registered User
 
Join Date: Oct 2003
Location: San Antonio, Tx
Posts: 51
Question 89,190E ovp relay

Hello I having a hard time with a ovp relay at first the car stall lost all power to the fuel pump and no spark. I check anything I could check and it seem there no power to pin 15 of the ovp I try a jumper wire from a key on hot wire to pin 15, it work at first the car start and ran good but later this wire shorted out on me it seem the ovp shorted and pin 15 is hot out not in ok I have a ovp coming but what I need to know is why I not getting power to pin 15 ? I have a poor print out of a Alldata drawing it show as far as I can tell the wire to pin 15 come from the Ign Sw to a Electrical center then to the ovp. What is this Electrical center ? how can I test to see if my bug is there or in the Ign Sw ?
Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page