Picture request from W126 M117 motor

[tinypanzer]

Hi all,


My indie mechanic seems to have omitted a part or two after re-assembling the accelerator linkage. Given the amount of work they did, a missing part here or there is to be expected.


Can somebody pretty please take a picture of the accelerator linkage assembly where the pivot sticks out of the firewall and where the linkage attaches to the engine hoist loop?

I think there is a spring or something missing because the pivot is moving around all over the place unhampered, and there is a LOT of play where the plastic ball meets the engine hoist loop. I temporarily fixed it by putting a bunch of washers in there to take up the slop, but clearly it is not supposed to be there in the first place.

I am trying to figure out what part they forgot to put back in so I can ***** at them with some degree of confidence.


Thanks so much!