Quote:
Originally Posted by halsk
Think the best investment would be a fuel pressure tester which will let you verify the control and system pressure.
I went out and bought a tester from JC Witney for about $60 which may not be the best tester out there did let me set the control pressure on my Warm Up Regulator on my 84 380sl - it was running way lean beforehand - now has the needed power and now tackling the Idle Speed Controller -
If you do order the fuel tester make sure it is for the Bosch CIS system and it will come with the necessary fittings or adapters to work with the MB.
|
Thanks for the info!
Is the" Bosch CIS system" the family name for all the Jetronic systems? Pls clarify
I did look at another set which named BY SIZE every single fitting- metric and SAE-- that came with the kit.
It cost more but I wondered if it still included everything needed for the MB gassers.
Here's the inventory from the ad:
Fuel Tester Kit includes:
- 1/4" x 1/4" inch pipe plug
- 2 pieces 5/16" x 1/4" NPT hose barb
- 2 pieces 1/4" x 1/4" NPT hose barb
- 0-50 PSI 1 1/2" diameter (0~3.5 bar) pressure gauge
- 0-100 PSI 2 1/2" diameter (0~7 bar) pressure gauge
- 4 hose clamps
- 5/16" hose
- 1/4" hose
- Ford spring lock adapter
- 1/4" NPT tee with valve
- GM T.B.I. Adapter
- GM quick connect adapter
- GM 2.2K adapter
- Ford hair pin adapter
- 13" Ford adapter hose
- Bleed off hose
- Bosch C.I.S. hose
- 24" basic hose
- 8MM - 1.00 banjo bolt adapter
- 10MM - 1.00 banjo bolt adapter
- 12MM - 1.25 banjo bolt adapter
- 12MM - 1.50 banjo bolt adapter
- Honda Adapter
- 12MM - 1.5 male x 10MM - 1.00 male x 1-9/16" adapter
- 12MM - 1.5 male x 10MM - 1.00 female x 1-1/4" adapter
- 12MM - 1.5 male x 8MM - 1.00 female x 5/16" adapter
- 2 pieces 12MM - 1.5 male x 10MM - 1.00 male adapter
- 12MM - 1.5 male x 10MM - 1.00 male x 3" adapter
- 12MM - 1.5 male x 5/8"-18MM -1.5 male 1-9/16" adapter
- 5/8" - 18 union
- 12MM - 1.5 male x 16MM - 1.5 male x 1 9/16" adapter
- 16MM - 1.5 union
- 14MM x 1.5 union
- 12MM - 1.5 male x 14MM - 1.5 nake x 1 9/16" adapter
- 1/4" PT - 19 union
- 12MM - 1.5 male x 1/4" PT - 19 male x 1 9/16" adapter
- 12MM - 1.5 male x 1/4" - 3/8" hose barb
Whunter, what do you think?
Who are the other experienced people? What do you think, in terms of inventory?
__________________
Strelnik
Invest in America: Buy a Congressman!
1950 170SD
1951 Citroen 11BN
1953 Citroen 11BNF limo
1953 220a project
1959 180D
1960 190D
1960 Borgward Isabella TS 2dr
1983 240D daily driver
1983 380SL
1990 350SDL daily driver alt
3 x Citroen DS21M, down from 5
3 x Citroen 2CV, down from 6
Last edited by strelnik; 03-14-2010 at 12:23 PM.
|
03-14-2010, 12:16 PM
Threaded Mode
