|
|
|
#1
|
|||
|
|||
water pump pulley
Could someone please tell me the trick to getting the water pump pulley off on a 1992 300sl-24 m104 engine.Thanks much
|
#2
|
|||
|
|||
I have a 93 M104, but not the exact same as yours. Is your problem how to get the bolts loose without damaging the pulley? If so, use an old belt from a car or one of your own old ones - leather works best if using personal belt. Just wrap it around the pulley and pull it tight to create a pinch-point on the belt in the opposite direction you are turning the bolts. Hope that was what you were looking for. Good luck.
|
#3
|
|||
|
|||
water pump removal
Thanks for the info.any tips on removal of water pump?Anything would be helpful. Thanks
|
Bookmarks |
|
|