|
|
|
#1
|
||||
|
||||
Cool harness resistor question???
I was interested in trying the cool harness DIY for my 92 400E. But I could not find the resistor sugested! I found a
NTE{1/4w 1k ohm 2%} NTE{1/4w 1.2k ohm 2%} will one of these work? |
#2
|
|||
|
|||
Unless you can find exact specifications from someone, it's really trial and error. On my 103 i started out with 700ohm and after 3 tries I ended up with a 860ohm. The original cool harness specifies 1100 ohm for the 5.0 m119 so start with that and then try changing it by 100ohm. I haven't been able to find a resistance curve for this sensor.
__________________
CENSORED due to not family friendly words |
Bookmarks |
|
|