Quote:
Originally Posted by mlozzi200478
i agree with everyone here,simple things first,clean the wheel sensor pick up on the back of the hub, with brake clean,make sure it looks like a clean gear after,then test te ohms and resistance between both sensors,with an ohm meter or voltage meter,while spinning wheel ,possible defective sensor,sometimes water works into them and causes this condition,remember your abs will not work when the light is on.
|
Not necessarily. If the OVP is the cause of the light, the ABS still functions fine. At least that was my experience for both my cars which had the issue at purchase.
That might be an easy way to diagnose the issue. If the ABS does not function on hard braking, look into the sensors. If it does function, look into OVP.
07-01-2010, 11:49 PM
Hybrid Mode
