Just bought a new switch to replace the faulty one, tried to remember how to lift console but had no luck. If anyone here can explain me how to do this chore I would really appreciate it. My car is a 1990 300SE and she is gorgeous
Her name is Benzina. and we have being together for the past 6 years.

I'm pretty sure you have to take out the ashtray first, then the coin tray right under it, and it slides and tilts outwards....

At least that's how I remember taking it out.


-Carlen

__________________
_______________________________________________

1987 560SEL (210,000 miles)

Thank you Solid Snake would you know how to pop the switch out?

Solid Snake is on the right track.

1. Slide the ashtray out as though you were going to snuff out a butt.
2. Slide the ashtray insert out.
3. Now look down at the back of the ashtray module and you'll see 2 screws. Remove them. Be careful they are easy to drop into the console where you'll never find them.
4. The ashtray module will now slide out in its entirety. You can unplug the power connection and light bulb or just let it dangle.
5. Get your fingernails under the front edge of the coin tray and pull it up and out. There are little tabs at the back edge that slide into slots in the shifter surround to hold the surround in position.
6. Now slide the shifter surround straight forward. Once it's far enough forward the tabs at the back and middle will come free and you can lift it straight up. There's not a lot of slack in the wiring, but with some wiggling and squiggling you be able to disconnect all the wires. The the surround just lifts out.

It's actually easier to do than it is to explain. Once you've done it, you'll be an expert. Good luck!

__________________
2000 Mercedes S500
1990 Mercedes 560SEL
1970 Triumph Spitfire

Thanks again work done successfully as per your instruction.