Quote:
Originally Posted by MTI
The factory location for the pin is in one of the lug holes of the spare, held in place by a black foam donut.
|
Having accumulated many of these tools, I'm pretty certain that the foam donut in the lug hole of the wheel is a 201 thing or maybe a later model thing. 123,126, 124 all come in the tool wrap.
As far as the 201 chassis I have one that I picked up which is not the stamdard length as shown in the OP picture but is about half that length, came out of a spare tire lug whole with a donut it's just much shorter!
10-25-2010, 02:02 PM
Threaded Mode
