|
|
|
|
|
#1
11-03-2010, 03:11 PM
|
|||
|
|||
|
2000 S500 abs/brake system warning light
The ABS and brake system warning lights are illuminated and the car is stuck in park. In addition, the brake lights do no opreate when the brake pedal is pushed. Turn signals and hazards are functioning properly. Any suggestions?
__________________
1995 E420 152k 1991 300D 2.5 348116 daily driver 1992 300E 2.6 196k-work in progress(head gasket)  2002 BMW 745Li 93k 
|
|
#2
11-03-2010, 03:47 PM
|
||||
|
||||
|
Bad brake light switch. Almost 100% sure this is the problem. All manufacturers seem to have problems with them, MB no exception, I'd be willing to say MB worse than some other companies.
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
|
#4
11-05-2010, 10:32 AM
|
|||
|
|||
|
How do I remove the brake switch? I removed the lower panel and there seems to be some plastic surrounding it. DOes it just pop out or is there some twisting and turning involved?
__________________
1995 E420 152k 1991 300D 2.5 348116 daily driver 1992 300E 2.6 196k-work in progress(head gasket) 2002 BMW 745Li 93k
|
|
#5
11-05-2010, 07:18 PM
|
||||
|
||||
|
IIRC there is a tab on the top and bottom (or just one on the top OR bottom. Hmmm.) and then it is 1/4 turn to remove it.
Gilly
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
|
#7
01-05-2011, 06:49 PM
|
||||
|
||||
|
So you installed a new switch and adjusted it?
__________________
Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)
|
 |
| Bookmarks |
|
|
Linear Mode
