I'm planning to replace all 4 brake hoses on my car when I do the brakes soon. Car is a 95 s320. Is there anything in particular that I have to watch out for when bleeding the brakes?? Are the chances high that the air will bubble into the ABS brain??

__________________
All it takes for evil to prevail is for good men to stand by and do nothing.

Too many people tip toe through life, never attempting or doing anything great, hoping to make it safely to death... Bob Proctor

'95 S320 LWB
'87 300SDL
'04 E500 wagon 4matic

You don't have to listen to your wife, if you have a Motion brake bleeder.

Jack

Lucky for me, I don't have a wife. Lol

__________________
All it takes for evil to prevail is for good men to stand by and do nothing.

Too many people tip toe through life, never attempting or doing anything great, hoping to make it safely to death... Bob Proctor

'95 S320 LWB
'87 300SDL
'04 E500 wagon 4matic

Jack, don't you mean a Motive Pressure Bleeder?

The master cylinder has front and rear chambers. Be sure to keep both full if you decide to have a helper press on the brake pedal to bleed the calipers instead of using a pressure bleeder.

__________________
Fred Hoelzle

Motive Products

Here you go. Good to have if you don't have anyone to press on the brake pedal while you bleed.

__________________
Jim

Don't use anything except good quality flare nut wrenches. I like my pressure bleeder, but I like my daughter helping me out more.

__________________
2009 E320 Bluetec 117,000
1995 E300D 306,000 Sold
1996 Ford Taurus LX 130,000 Sold
1985 300TD Still 225,000 Sold
2016 Ford Fusion 24,900