|
|
|
#1
|
|||
|
|||
126.rear window guide block
what would be the correct way to install a new plastic guide . The block operates the window glass and has a peened in holding pin.
Thanks 126 300se
__________________
mark |
#2
|
|||
|
|||
The MB way is to remove the lifter & grind off the original, then drive it out.
Install the new one & peen it over. Of course you can use a bolt & self locking nut as well.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
mbdoc Thanks for information.As advised i will install a self locking nut -bolt replacement instead of the pin ,in situ seems impossible to peen over.
Regards
__________________
mark |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|