|
|
|
#1
|
|||
|
|||
how to disable ASR function for S600 W140?
Hi anyone knows how to disable ASR function to prevent limphome mode, i have change all parts necessary as indicated on the star diagnosis but still the ASR light comes on alternately . I was told to ask MB doc.
|
#2
|
|||
|
|||
Hey what up cool? Its pin one and pin six, I think, take a small wire and install one end in pin 1 and the other end in pin 6,,tape it so it wont fall out. this will not make the dash light go out bur will disable the ASR in the car..
|
#3
|
|||
|
|||
Wasn't there a post recently, somewhere, that said "whatever you do don't connect pins 1 and 6, it eventually blows out the X? (some very expensive electronic part) Sorry, can't remember the details.
|
#4
|
|||
|
|||
Rule #1 when approaching an ASR light is to start from the ground-up and IGNORE the codes. Simplest parts first! You want to replace the ETA, wiring harne$$e$, etc? Feel free, but you might want to check simple grounds and non-indicated eletrical issues first
__________________
former: 83 300D, 97 C230, 93 400E current: 08 C300 Luxury , 92 500SL |
#5
|
|||
|
|||
I had something similar ...
Quote:
Don't know if that's any use. RayH |
#6
|
|||
|
|||
any idea which part will be affected/ is it the ASR control module?
|
#7
|
|||
|
|||
Hi Buddy it just might work but need to find out if there are any side effects? any idea is most welcome.
|
Bookmarks |
|
|