|
|
|
#1
|
|||
|
|||
93 190e code reading question.......
Have a 93 190e 2.3 L and I want to read the codes. I have the 8 pin box by the battery with the led by the #2 pin location. When I turn the key to the on position the led is steadily lit, I press the button for 3-4 seconds and it is still lit. Need some guidance on how to do this correctly
|
#2
|
||||
|
||||
turn the key all the way to the right, the position just before cranking the engine then try depressing the led button
__________________
1990 190E 3.0L |
#3
|
|||
|
|||
That is what I did. I tried it again but same result, led stays lit. No flashing
|
#4
|
||||
|
||||
maybe you dont have any fault codes stored....in which case you should still get 1 blink meaning no fault found. check your fuses.
__________________
1990 190E 3.0L |
Bookmarks |
|
|