Benhogan, your right. I just didn't want everyone to gang up on me with suggestions of Snap On only stuff ;->

Been looking on CL. What I really want is a set of stubbie and longer 1/4" hex sockets, but can't find anyone who has them.

Right now I just want y'all to feel sorry for me ;-< I feel like I did 100's of crunches from getting up and down on the crawler all day. And since I didn't have said 1/4" 6mm hex, I had to be a contortionist with an allen key just to get the LAST bolt off, too me 30 min...

*runs and takes gobs of motrin*

*then runs and looks on ebay*

__________________
"Well, once again, we find that clowns and anarchy don't mix..." - The Tick
'94 E320 ~ Wikel
'87 300SDL ~ Frieda
'87 190E ~ Thurmond III
'84 944 ~ Schrickelgruber
'86 535i ~ Joerg

I have about 1000 lbs of US made high quality tools all the way up to 32mm. Some bigger sockets to 46mm and to 3-1/2" but the bigger ones are Snap-On.

Send me a list:

You can buy Armstrong, Easco, Cornwell, Williams, Proto, all of which are made by Danaher Tools in the US, which sells their entire inventory exclusively to the US military and limited other industrial frims.

Metric and US.

I also have about 75 tool boxes. But I'm far away in Michigan so I'm thinking Ebay for the tools and the local swap meets for the tool boxes which are Proto, Snap-On, Stack-On, Napa and Craftsman.
Plus some other heavier duty ones used for tank repair.

This purchase of mine has netted some very cool tools, including bullet-proof Fluke meters. I don't worry about dropping one of those, lol.

__________________
Strelnik
Invest in America: Buy a Congressman!

1950 170SD
1951 Citroen 11BN
1953 Citroen 11BNF limo
1953 220a project
1959 180D
1960 190D
1960 Borgward Isabella TS 2dr
1983 240D daily driver
1983 380SL
1990 350SDL daily driver alt
3 x Citroen DS21M, down from 5
3 x Citroen 2CV, down from 6