No it does not. Seems I need to remove the foam in order for it to slip thru the larger opening behind the foam (in the bulkhead).

Sorry about lack of pics but I will try to put some up here in a few...thanks!

__________________
Dale

Here are a couple pics of that area where I need to thread the plug thru...

__________________
Dale

Remove that black plastic piece above that area and you should be able to get the wires though. I think...

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

I think you are correct.. I've been side tracked changing out the spark plugs!

Getting ready to get back to harness...

__________________
Dale

Well, I'm anxious to fire it up but I have an issue with a broken (brittle) vac line as seen in pics at front of engine underneath the cam end cover.

What is the vac line running to? Not familiar with the 'block' it connects to at front of motor...

__________________
Dale

oops! I forgot to include pics in the previous post but it's a rather moot point at this stage of the game as I have been to the dealer and picked up a meter of small vac line and installed it.

The car is back together and is running very nice! The spark plugs I pulled out of it were pretty well shot and gapped at ~ .050! It just purrs and is very responsive at the throttle as it had gotten to where it would oft times hesitate slightly, sometimes completely stumble and backfire.

I'm kinda surprised at the relative good condition the old harness is in - I mean, it's NOT visibly crumbling or crackly sounding as I handle it. Perhaps it's a different story if one would cut away the outer 'tape binding'.

Thanks for your help and advice and now I am going to enjoy a nice ice-cold beer! Cheers

EDIT: BTW - If anybody is interested in the old harness for the ends, please PM me and we'll discuss details. Better do it quick as I tend to not allow stuff to lay around....just sayin'!

__________________
Dale

How long did the job take you? Easy? Hard?

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

Started the project at 9 and had it cleaned up at 3...

BUT...there was a trip to the dealer and time to get the old spark plugs out and the new ones in and a few minutes to stretch my back and legs (not as young as I once was, ya know)!

Scale of 1 - 10 I consider it a 2.5 - 3 (1 = easy / 10 = difficult). It really is a pull and plug deal most of the way except there's a couple places I needed to go ahead and unplug several of the original connectors so I could get the old one out of the way.

__________________
Dale

Does the place where you got the wiring harness make them for various other w*** model Mercedes. I wasn't certain from the reads if they had to be special made maybe?

You can get them for pretty much any Mercedes. The one 85 DSEL bought was made by Delphi (one of the largest auto parts suppliers).

The harness DSEL bought is usually carried by a lot of places because its a known problem on a variety of Mercedes of that era.

If you're looking for something less common or known like that your best chance it so order it from Parts.com using the part number for the harness.

__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k

Sorry Rebe but I was out for a while this evening and didn't get to your question until after it had already been answered. JamesDean pretty much said it all! Just search the web for the product by the part number and you'll get many hits to choose from. As JamesDean said, try Parts.com and I would suggest the place I got mine I think it was XXXX. I think I mentioned the place in one of the earlier posts in this thread.

__________________
Dale