I'm having a strange problem with my 1987 260E's heat. On cold days (below 25F) the heat will not turn on unless the car is warmed up and then shut off. Once you start it back up the heat works fine. When the heat is not working, the blower motor is not spinning and no switch does anything on the control unit. Once you restart the car though, the heat works on all settings. Also, the heat works fine on warmer days above freezing.

Any ideas? I'm thinking either the control unit, or the temp sensor in the head?

Just a thought......

The key switch gets sloppy with years of use.

The spring return (after releasing from the start position) back to the "on" position sometimes doesn't align with the contacts.

Next time the blower doesn't run, try moving the key counterclockwise sightly and see if the blower ramps up speed.

Jim

__________________
14 E250 BlueTEC black. 45k miles
95 E320 Cabriolet Emerald green 66k miles
94 E320 Cabriolet Emerald green 152k miles
85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles