|
|
|
|
|
#1
01-07-2013, 01:18 PM
|
|||
|
|||
|
Member with Carsoft 7.4 or similar diagnostic tool in Orlando?
Does anybody who lives in Orlando have Carsoft or a similar diagnostic tool? I need to clear a stored transmission code from the TCM in order to prevent it from going back into (soft)mechanical limp mode. I'm not referring to the basic handheld scanner that clears generic codes. This task requires a tool to be hooked up to the 38 pin module under the hood. I have to drive out of town Jan. 14,2013. Your assistance is greatly appreciated.
P.S. Conductor plate,fluid,filter and leaking connector were all changed. Last edited by amani356; 01-07-2013 at 01:29 PM. 
|
|
#2
01-07-2013, 04:46 PM
|
|||
|
|||
|
i have a maxidas we try it on. i've not used it yet on a 38 pin car and need to know myself if it works well on a car that old. send me an email, put carsoft in the subject area. btw, i have a 407 area code phone. lemme know, chuck.
|
|
#3
01-07-2013, 04:55 PM
|
|||
|
|||
|
i just bought a working one from a member...
however, you do need a computer with a true pcmia 9 pin card already in it.... ...that typically is an older computer.... i am trying to track down a computer...
__________________
1989 300ce 129k ( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone) 1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus 1994 e320 Cabriolet 108k  1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it [/SIGPIC]
|
|
#4
01-07-2013, 05:11 PM
|
||||
|
||||
|
There is a member at MBWorld.org whose screen name is Plutoe. He has what you need but not sure if he's close to you or not.
__________________
Good luck. 1998 E320 Wagon
|
 |
| Bookmarks |
|
|
Linear Mode
