It will not lower enough on the side where I took out the hexagon bolts that hold the rubber mounts in place. I am trying to replace the mounts and the tech manual says that I should lower one side at a time.

The front mount area clears just a little while the back hardly moved down. I don't have enough clearance to remove them with my press tools (I have the correct tools for this job).

It's been suggested that I lower the whole subframe but I really don't want to open a can of worms.

Attached Files

35-040_W124_Rear Subframe Mounts.pdf (305.9 KB, 111 views)