Hello,

I want to replace two fuel hoses on my 1990 300se. I have removed the fuel pump/filter/regulator as a unit. The hose from the fuel filter to the fuel supply line has a leak and I must replace it. I also bought the hose that goes from the tank into the fuel pump since I was going to have it all apart anyway.

My problem is there is very limited room between the fittings and the axle to get a wrench in there. In addition, there is a return line that loops around in the same area that I do not want to disconnect unless I have to. Does anyone have experience replacing these hoses? Any help with how is to best do it and if any special tools are required would be helpful. Thanks.

Lloyd

This problem has been solved and the job has been completed.