Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-03-2013, 03:21 PM
agarn
 
Join Date: Oct 2010
Location: New Bedford, MA
Posts: 14
I had a few mins before work so I took the air cleaner off and started the car. I could feel the ICU working. After starting the idle was a little high for about half a minute then slowly decreased until the car was running rough with the econ gauge almost in the red and fluctuating. Then the idle went up to 1500 as the gauge pegged solid to the black. I shut the car off and immediately start it and it idled perfect at about 650 and the vacuum gauge not quite pegged to the left. After a few minutes the idle climbed back up to 1500 and the vacuum gauge was again pegged to the black. All the while the microswitch on the engine was touching the linkage and the linkage never moved. Next I will get a meter and check the duty cycle.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page