|
|
|
#1
|
||||
|
||||
AT modulator o ring replacement
Hi,
I have a large leak coming from vac modulator area so I thought I would start with replacing the modulator o ring. I have read the posts on how to access the modulator. When looking at it I am not sure if there is enough room to remove the cover and modulator so I can replace the o ring. Can this be done with the trans. on the car or does it require r/r. Thanks Last edited by savas; 12-17-2009 at 06:05 PM. Reason: spelling |
#2
|
||||
|
||||
I forgot to metion that this is on a 300E. Thanks again for any help.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
240D piston ring replacement | gavinbr | Tech Help | 4 | 02-01-2005 09:15 PM |
450SL ring gear replacement | TonyG | Tech Help | 0 | 09-24-2004 10:48 PM |
OM603 piston ring gap arrangement? | skleutz | Tech Help | 1 | 07-20-2004 02:15 AM |
CAM Chain Tensioner O Ring Replacement E300D | bhackett | Diesel Discussion | 6 | 07-18-2004 05:15 PM |
I dropped a small snap ring in my transmission --can I leave it? 83 240D | Carrameow | Diesel Discussion | 8 | 12-09-2003 12:04 AM |