PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Front End Clunk When Turning (http://www.peachparts.com/shopforum/showthread.php?t=345796)

Guyton Buzz 11-03-2013 07:24 AM
Front End Clunk When Turning
 
3 Attachment(s)
Had a good clunk especially when turning or on certain bumps in the road. Even at low speed. Found torsion bar support broken into parts, it wiggled when I grabbed it. Simple fix, about $8 for Uro part from the Rock. And of course, I noticed now a bushing is wobbling about. Should have ordered those at the same time....

lee polowczuk 11-03-2013 08:13 AM
Quote:
Originally Posted by Guyton Buzz (Post 3232901)
Had a good clunk especially when turning or on certain bumps in the road. Even at low speed. Found torsion bar support broken into parts, it wiggled when I grabbed it. Simple fix, about $8 for Uro part from the Rock. And of course, I noticed now a bushing is wobbling about. Should have ordered those at the same time....
yeh ...kind of scary when that bracket breaks... i have replaced a couple of them on two different 124's.... that brackets isn't the most stout of pieces.

also as you know that's easy rubber to replace

Ferdman 11-04-2013 05:21 AM
Guyton, in case you haven't read the thread about URO door seals check it out. The general consensus is URO parts are "inferior" to be polite. You may be better off getting used replacement OEM torsion bar brackets from a MB vehicle at a local salvage yard.

big dog 2 11-07-2013 10:28 AM
URO
 
Quote:
Originally Posted by Ferdman (Post 3233353)
Guyton, in case you haven't read the thread about URO door seals check it out. The general consensus is URO parts are "inferior" to be polite. You may be better off getting used replacement OEM torsion bar brackets from a MB vehicle at a local salvage yard.
+1

Both of my URO brackets broke within six months of installation. Went to pick and pull to get used original OEM brackets!


All times are GMT -4. The time now is 01:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website