|
|
|
#1
|
|||
|
|||
"PCV" SYSTEM IN 93' 300E 3.2L
My 300e has developed multiple oil leaks. Is there something that could be stopped up in the system? I remember the old PCV valves would stop up and force oil out in any weak spots. Any help would be greatly appreciated, thanks.
|
#2
|
||||
|
||||
mines a 99 but might be a little same,I have a hose coming from crankcase to electornic valve,then from there a hose to intake manifold.If you have a valve maybe its not working
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran |
#3
|
|||
|
|||
that 300E 3.2 has the old inline 6 engine - which has an inherent leak spot at the headgasket front and rear edges.
The 99 E320 has the V6 which does not have any such leak issues.
__________________
2012 BMW X5 (Beef + Granite suspension model) 1995 E300D - The original humming machine (consumed by Flood 2017) 2000 E320 - The evolution (consumed by flood 2017) |
#4
|
||||
|
||||
if you have a purge valve not working it can cause gaskets to blow,I just read up on this,you can clean the valve with MAF cleaner
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran |
Bookmarks |
|
|