Quote:
Originally Posted by Ferdman
nestorb98, I have never replaced valve stem seals so I can't provide any advice with that job. With that much oil consumption it's a good idea to replace the valve stem seals.
Recommend buying Bosch or Beru spark plug wires. Apply a light coat of dielectric grease on the inside of each rubber boot to facilitate future removal. I apply a small dab to a Q-tip, then smear the dielectric grease inside the boot.
|
changing the valve stem seals should not be a big deal at all on the 2.3... on the six valve closest to the firewall is a pain because there's no access with off the shelf tools.... do a search... it helps to have a compressor and a special tool to guarantee that you are at TDC .... sorry i can't remember all the details, but i have done it twice.... you should see you consumption drop dramatically.
__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)
1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus
1994 e320 Cabriolet 108k
1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it
[/SIGPIC]
|
11-14-2013, 08:01 AM
Threaded Mode
