Wipers fixed in 10 seconds - thanks guys
 

The old 126 had the stalling wipers in intermittent mode, and right in the middle of one of our rare Dallas "snow storms" (1/2 inch).
Figured I was out a motor, linkage, or a $$$$ combination relay.
But I read a thread here about the fuses getting a little resistive in the holders, so I figured "try it" and just twisted them around a bit - problem fixed!!!!!!

Love this forum- thanks to you guys, Old Pearl is still going strong after 24 years. And I'm still learning (and then forgetting) things about these wonderful old cars.

DG

Wouldnt hurt to do a preemptive !

Replace all fuses with ceramic ones that have copper or brass element.
2 sets from ebay are ~$10 delivered

Clean each fuse holder as you go and also check the fuse roadmap inside the fuse box cover