 
         
		
					|   | 
 | 
 | 
| 
 | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | |||
| 
 | |||
| 
				
				Painting exhaust system
			 
			
			Just picked up a new exhaust system and it has the silver paint applied. I was planning on painting it to prolong the life of the system with either zinc paint or some exhaust hi temp paint from the local auto supply. Any suggestions? I was leaning for the zinc to prevent corrosion externally. Thanks. | 
| 
			 
			#2  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			The zinc I've used before tends to burn off.  High temp silver works just fine, be sure to wipe down with lacquer thinner for good adhesion.  And, clean / touch up  every few years.
			
				
			
		 | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			krjt, as far as I know exhaust systems normally rust from the inside out, primarily as the result of a vehicle being driven short distances repeatedly.  The exhaust system never reaches operating temperature, and internal condensation causes oxidation to start on the bottom of the exhaust pipe and muffler, etc.
			
				
			
		 
				__________________ Fred Hoelzle | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			I'm going to use stove paint.
			
				
			
		 | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			What is stove paint?  brush on or in a can?
			
				
			
		 | 
| 
			 
			#6  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Spray and brush.  Search "stove paint" for products.
			
				
			
		 | 
|  | 
| Bookmarks | 
| 
 |  |