|
|
|
|
|
#1
04-09-2002, 11:00 AM
|
|||
|
|||
engine want start w126 '85
Suddenly the engine want start . Ignition works. Maybe fuel pump? Do i hear the pump running when ignition on? Help....
boili 
|
|
#2
04-09-2002, 11:40 AM
|
|||
|
|||
|
icu
Where and what is a ICU? and how to test it?
tks, boili
|
|
#3
04-11-2002, 01:09 AM
|
|||
|
|||
|
Thanks for your help so far. Had to move vehicle of the street today and tried to start engine again and engine run on "fumes" for a fraction of a second only.
Here is what I have checked: 1. Ignition is fine - the plug get a good spark 2. no power supply at pump while trying to start engine 3. plug the pump relay - no corrosion have no spare relay to try out. Any other way to check power supply to pump? tks, Marcel
|
|
#4
04-13-2002, 07:14 PM
|
|||
|
|||
|
Thanks for your help. Today I took the time to check everything including the fuel pump relais. I found a broken solder connection and fixed it. That was all it took. However, a new relais is on the way.... just in case.
marcel
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| cyl. head changed - engine won't start | brookolli | Tech Help | 11 | 08-09-2011 05:12 AM |
| will the timing chain cause the engine not to start? | jmdunn | Tech Help | 5 | 01-22-2003 12:42 PM |
| Engine cuts out, but will start right back up | Q | Tech Help | 5 | 10-27-2002 02:00 PM |
| Help! Can't start the Engine of My 98 E320 after 45 Mins of Jump Start | Maruzo | Tech Help | 9 | 07-20-2002 01:14 AM |
| W126, 300SE wierd start problem | autounion | Tech Help | 2 | 10-12-2001 09:05 PM |
Linear Mode
