torquing head by degrees of rotation vis-a-vis ft/lbs

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
torquing head by degrees of rotation vis-a-vis ft/lbs

04-10-2002, 09:47 PM

jon isgreen

Guest

Posts: n/a

torquing head by degrees of rotation vis-a-vis ft/lbs

Mercedes 2.2L, diesel with aluminum head,'84-'85....
Does anyone know what the equivalent ft/lbs of torque are for the two 90 degrees of rotation when torquing this head,i.e., what the final torque should be?
Thanks, jon

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OM603 - oil leak from exhaust port with new head!	gsxr	Diesel Discussion	40	01-29-2019 10:52 AM
380SEL replace 6 bent valves or used head?	New2MBZ	Tech Help	0	07-30-2003 01:17 PM
Sharing experience with cylinder head on 103 motor (1986 300e)	marinmbfan	Tech Help	13	08-06-2002 05:34 PM
replacing head...degrees of rotation to foot/pounds.	jon isgreen	Tech Help	8	03-25-2002 07:40 PM
Head gasket replacement	MarkM	Diesel Discussion	16	11-02-2001 12:07 PM

All times are GMT -4. The time now is 12:38 AM.