![]() |
|
|
|
#1
|
|||
|
|||
w123 heat only works when i turn key?
My heat only works in my 85 euro 300D when I start car and turn on heat then move my ignition key - just a tad to the left. Has anyone encountered this? What is the fix?
__________________
72 350SL, 73 450SL, 82 300TD,84 300SD, 85 300D |
#2
|
||||
|
||||
You need to replace the electrical portion of your ignition switch. Very common problem i have seen it a lot.
__________________
1985 300TD Turbo Euro-wagon 1979 280CE 225,200 miles 1985 300D Turbo 264,000 miles 1976 240D 190,000 miles 1979 300TD 220,000 GONE but not forgotten 1976 300D 195,300 miles 1983 300D Turbo 175,000 miles http://i42.photobucket.com/albums/e3...e485-1-2-1.jpg |
#3
|
|||
|
|||
thx - very helpful
__________________
72 350SL, 73 450SL, 82 300TD,84 300SD, 85 300D |
#4
|
|||
|
|||
never did get around to doing anything - then yesterday I met a guy test drive it (after I drove it and met him) and he kept turning key and now it goes all the way to the right and nothing happens. I am going up there this morning and making sure battery is fine and lites come on - and will see if glow plug lite will come on. My son says AAA will come out and do some repairs if I know exactly what to tell them.
__________________
72 350SL, 73 450SL, 82 300TD,84 300SD, 85 300D |
#5
|
||||
|
||||
I had this problem with my 87 300TD.
There are three parts to the "ignition" switch: 1. Lock barrel. This is the part the key fits 2. Flat connecting rod. This part joins part #1 with part #3. 3. Electrical switch. This part contains the contacts and a rotary arm that moves in concert with part #1, via part #2. On my car, part #2 failed. It twisted, and did not allow the rotary arm in part #3 to make contact with the starter terminal. For simplicity, I'm disregarding the steering column lock mechanism..... ![]() Jim
__________________
14 E250 BlueTEC black. 45k miles 95 E320 Cabriolet Emerald green 66k miles 94 E320 Cabriolet Emerald green 152k miles 85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles |
#6
|
||||
|
||||
Cleaning the copper contacts on the back of the ignition AND slightly pulling FWD the tabs to add more tension is a fix if you don't want to throw cash at a new one.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
![]() |
Bookmarks |
|
|