|
|
|
#1
|
||||
|
||||
Injector adaptor
Picked up a VW gas injector pressure/spray cleaner.
Any suggestions on where I can get the VW IP outlet thread to match the male end of a 300E injector line ? The unit has a male thread which mates to the VW IP side of a VW injector fuel line. I believe the 300E is a 12mm. Dont know what size the VW is.
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#2
|
||||
|
||||
No one wants to guess which is a good thing.
Calipers saved the day which I should have used to begin with. 300E Fuel Distributor side is 12mm or .474" VW IP side of the line is 19mm or .746" For the purists, 12mm = .4724 and 19mm = .7480
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#3
|
|||
|
|||
there is a dedicated adapter from bosch. the original kjet injectors fit the tester, the ke-jet injectors have a finer thread. good luck, chuck.
|
#4
|
||||
|
||||
Thanks Chuck..any ideas where to get one ??
Ive tried all the box auto stores but no luck. Did at least confirm the threads to be 14mm for the VW IP side and 10mm for the MB fuel tube. Looking Id say both treads are coarse
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#5
|
||||
|
||||
Ya just have to figure out what to look for.
Mityvac A 10mm coupler and its done. And with a lathe here.. would have taken longer to chuck things up that to make one.
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
#6
|
||||
|
||||
Not having a lathe or mill here, the real solution was 'store bought'
Nicely this will let me use the tester/cleaner on many different injectors. Product: W80577
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not." |
Bookmarks |
|
|