PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   w210 power seats and power windows (http://www.peachparts.com/shopforum/showthread.php?t=368756)

Erich 05-28-2015 04:32 PM

w210 power seats and power windows
 
I need some Help I just purchased a 1999 w210 E300 , I had the battery disconnected for a bout 2 days for service . now the power seats do not work correct after reconnecting the battery they work fine but over night the next day they do not . To get the power seats to work again I must disconnect and reconnect the battery.

Prior to service the windows worked now they do no work smooth one has to hold the switch just right and the drivers side sometimes does not work at all. the rear windows work just fine .

Erich. T.

Can't Know 05-28-2015 04:39 PM

Follow the procedure in the manual to reset the auto-up-and-down feature for the windows. The rockers are five-position with off in the middle, first position either side of off is normal up and down. Push to the second position in either direction and they won't work until you re-synchronize them. (If you don't have a manual you can download one at mbusa's website.)

There is a reset procedure for the seats, let me see if I can find it.

Can't Know 05-28-2015 04:42 PM

Here's what I had on the seats (from the BW 210 forum):
Quote:

1.) Recline the chair DOWN all the way (flat position) and keep the recline button held down, in that direction, for an extra 5 seconds.
Don't interrupt the process, keep the button held down until you'll hear "click" sound from the switch. It's mean's you reset the stop position for flat position.
Note: you must do in quiet environment to hear "click" sound

reclining from the upright stop to the flat stop without interruption (until hear "click" sound) allows the motor to count revolutions from flat position, so you can restore stop point for upright position.


2.) Recline the chair UP all the way (upright position) and keep the recline button held down, in that direction, for an extra 5 seconds.

Voila! you already reset reclining stop position.

Erich 05-28-2015 05:14 PM

The seats stop working over a space of time like over night they do not move . I have tried to re set by holding in each position for 10 sec this does not work . The seats work move only when I disconnect and recommend the battery


All times are GMT -4. The time now is 06:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website