|
|
|
#1
|
|||
|
|||
W124 300E 92
My right license plate light just went out. I changed the bulb and nothing changed. Light indicator is on as well. Inspected most of the wiring and cant find anything that is torn because everything is inside the black casing. left side works, right side doesn't. Fuses are good in the fuse box. Where could the problem be? Cant drive or will get pulled over. Thank you!
|
#2
|
|||
|
|||
temp fix
So that you can still drive, jump the wires from the good side to the bad side so you get power to both sides. I'm assuming that you've swapped bulbs to check both the bulb itself, as well as, the contacts in the bad light. You'll have to run a Continuity check on the wiring with a voltage meter to see where the break in the wiring is. There's lots of youtube videos on how to use a volatage meter.
__________________
03 CLK430 Cabrio 211K Pweter Silver/ Oyster Leather 90 300SEL 214k Pearl Black/ Alto Grey/Black Leather Prior: 85 190E, 88 300TE, 89 300TE, 90 300E 2.6, 90 300TE, 92 300E 2.6, 91 and 93 300SL, 87 Ferrari Mondial Cabrio |
#3
|
|||
|
|||
check the wiring at the hinge - it flexes a lot in its lifetime and eventually breaks off.
__________________
2012 BMW X5 (Beef + Granite suspension model) 1995 E300D - The original humming machine (consumed by Flood 2017) 2000 E320 - The evolution (consumed by flood 2017) |
#4
|
||||
|
||||
Quote:
__________________
1959 Gravely LI, 1963 Gravely L8, 1973 Gravely C12 1982 380SL 1978 450 SEL 6.9 euro restoration at 63% and climbing 1987 300 D 2005 CDI European Delivery 2006 CDI Handed down to daughter 2007 GL CDI. Wifes |
Bookmarks |
|
|