Not sure what happened, but my low speed fans are not working, but the high speed fans work. I have disconnected these 2 wires (orange and red/blue) that connect to the high pressure a/c switch and shorted them together and all I hear is the relay clicking in the fuse box, but no low speed fans. In the past this would trigger the low speed fans, but not anymore. There is also a part that is mounted right below the abs module with a wire connected at each end. I want to say I read that it was a resistor of some sort for the fans.....I looked that over and it also appears fine. On the fuse panel cover it shows that fuses #1 & 2 are for the fans and those are also fine (tested both, then replaced and tested the others). Anyone have any other suggestions? Oh, I also swapped the high speed/low speed relays around since I know the high speed fans still work and this also made no difference.