Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-07-2016, 01:55 AM
Registered User
 
Join Date: Nov 2016
Posts: 2
M104.992/E320 - Help ID part - coolant line from WP to head

I am in the middle of replacing my timing chain cover gasket and in need of some assistance. I am trying to identify the name of the part with the red arrow in the photo below. It attaches to the timing chain cover and has a coolant line that runs over to the water pump. I have searched multiple forums and so far I haven't been able to find what I'm looking for.

This part should be held in place with two bolts but both were missing on my car, the o-ring was the only thing holding it in place, very surprised it wasn't leaking from here. I think if I can find the name of this part I can do some more searching and replace the o-ring & bolts for reassembly.

Thank you in advance.

Attached Thumbnails
M104.992/E320 - Help ID part - coolant line from WP to head-img_2090.jpg  
Reply With Quote
  #2  
Old 11-07-2016, 04:50 AM
oldsinner111's Avatar
lied to for years
 
Join Date: Nov 2008
Location: Elizabethton, TN
Posts: 6,246
I would just find some metric bolts at a hardware store,and use prema gasket maker.
Reply With Quote
  #3  
Old 11-07-2016, 05:35 AM
Registered User
 
Join Date: Aug 2006
Posts: 726
They call that part an outlet (104 203 04 31). Seal ring is 017 997 23 48 and the bolts are 910143 008012.
There is also a seal ring 017 997 21 48 that goes between the head and the front cover for coolant.
The outlet bolts should also hold an engine lifting bracket (suspension eye) 104 223 14 41. If not installing it you will need 2 M8 washers for the bolts.
Reply With Quote
  #4  
Old 11-07-2016, 10:03 AM
Registered User
 
Join Date: Nov 2016
Posts: 2
Wow Rick76,very helpful. What is your resource for the little parts? These searches seem to eat up so much time.

Thank you!
Reply With Quote
  #5  
Old 11-08-2016, 04:43 AM
Registered User
 
Join Date: Aug 2006
Posts: 726
Those are long bolts that hold the outlet to the front cover and through to the head. They are 100mm M8's. They might be updated to ones with an E12 external torx head opposed to the original Allen.
I have the electronic parts catalogue (EPC) on one of my computers and also the old microfiche, although I haven't used them for years.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page