|
|
|
#1
|
|||
|
|||
Shift linkage length?
After my recent trans swap my shifter won’t reach park, it was tight without bushings so I thought perhaps someone had adjusted the linkage to be tight without them and after I added the new bushings it needed readjusted. However, The rod is not long enough so I’m wondering if someone could measure what the length from post to post is “supposed” to be. It is a 88 300ce, thanks.
|
#2
|
|||
|
|||
No worries, I bent it when I removed the old trans. All good now
|
Bookmarks |
|
|