I have a quick question: the left rear wheel bearings and carrier are making noise and need to be replaced. Is this a simple job, or are special pullers/pushers required? It looks like a simple job from the outside - is it?

Thanks for any help.

__________________
Gary

1992 300E, 2006 E350 and 2006 C230 Sport

No

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

Here’s one way that should be similar to your car: https://www.youtube.com/embed/wKYL9_4mXRI

__________________
Prost!

Care to elaborate?

__________________
Gary

1992 300E, 2006 E350 and 2006 C230 Sport

Follow the video and from asking for help on here you should be fine.

__________________
Jim